| |  | |
Click to Enlarge
| Lowest price:$279.99Description:
Your audio/video components are constantly being bombarded by electromagnetic interference (EMI) and radio frequency interference (RFI) through their power cords. This contaminated power can affect audio/video equipment and will degrade the overall performance of your entire system. Common symptoms of contaminated power include pops, hisses, hums, and visual artifacts.The Furman S-5500 power conditioner is designed to filter this noise, supply clean power to your system, and provide noise isolation between the outlet so that any noise created by an A/V component can not contaminate the power going to equipment plugged into the other outlet banks.Sequential Startup/Shutdown Complex audio/video systems may be susceptible to voltage transients generated internally at start-up/shutdown if all of the equipment is powered on or off at the same time. This can cause speaker "thumps" which are not only annoying but can also damage the speakers. The Furman S-5500 is designed to eliminate these transients by providing a "start-up" delay for the Amplifier outlets and a "shutdown" delay for the Switched Outlet Bank. This allows the components plugged into the Switched Outlet Bank to power-up and stabilize before any amplifiers, powered monitors, or powered subwoofers are turned on. This sequence is reversed during shutdown. The amplifiers, powered monitors, and powered subwoofers turn off, their power supplies drain, and then the equipment plugged into the Switched Outlet Bank is turned off.Voltage Sense Trigger This feature provides an ON/OFF trigger for the S-5500 using a Direct Current voltage signal. The presence of this power signal will turn on the S-5500's switched outlets. When the source component is turned off, the voltage trigger signal is also turned off and the S-5500 power conditioner's shutdown sequence is initiated. An AC adapter of the appropriate voltage, plugged into a switched outlet, may also be used if a DC trigger is not built in.The Furman S-5500 voltage sense trigger input uses a standard 3.5mm (1/8") mini-plug jack. This jack has a built-in electrically isolated switch. If nothing is inserted into the input jack, the voltage sense is bypassed and the Power Button on the front panel has sole control of the startup/shutdown sequence. If a plug is inserted into the input jack, the front panel switch is bypassed and the voltage sense becomes the startup/shutdown trigger. Please Note: The unit needs to be plugged in, and in the powered OFF state before inserting the DC input trigger mini-plug.Automatic Extreme Voltage Shutdown (EVS) Furman's EVS power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment. If the S-5500 senses an unsafe power condition, it will automatically disconnect your equipment from the power
Brand:
Furman
Category:
Accessories
>
Power Essentials
>
Power Conditioners
UPC:
654061028239
Model Number:
S-5500
MSRP:
$480.00
|
|
|
|
Furman AR-20 II Voltage Regulator Black | 
Furman IT-20 II Balanced Power Conditioner Black | 
Furman M-8X Power Conditioner | 
Furman Merit M-8LX Power Conditioner with Lights |
|
| |
|
Bookmark Us!
