| |  | |
Click to Enlarge
| Lowest price:$189.00Description:
The Holier Grail effects pedal expands on the capabilities of the Holy Grail pedal from Electro-Harmonix. It contains eight different reverb presets: SPRING, HALL, ROOM and FLERB each at a LONG and SHORT reverb length. In addition to reverb, there is a GATE that ends the reverb tail early for an unnatural yet often pleasing reverb sound.Holier Grail Controls: TYPE Switch Selects the type of reverb sound that the Holier Grail will produce: SPRING, HALL, FLERB or ROOM. LENGTH Switch Selects between a LONG or SHORT reverb length. A LONG reverb length is attributed to making a bigger sound, such as a large hall, room or reverb tank. A SHORT reverb length will yield a smaller sound, such as a small room, hall or reverb tank. BLEND Knob Is a Wet/Dry control for the reverb signal. As you turn the BLEND knob clockwise you will hear more reverb and less of your instrument. The Holier Grail is designed so that as you turn the BLEND knob from its minimum position to the 12 o clock position you will hear a subtle amount of reverb added to the output. As you turn the BLEND knob from 12 o clock to its maximum position the amount of reverb you hear will increase dramatically. It is designed this way so musicians can hone in on just the right amount of subtle reverb. GATE Switch The GATE switch determines how the gate circuit will effect the audio path. The three positions are OFF, REVERB ONLY, and REVERB + DIRECT. When the GATE switch is in the OFF position, the gate is completely bypassed and the gate has no effect on the audio path. In the REVERB ONLY position, the output of the reverb generator will be fed into the gate before it goes to the BLEND knob. The output of the gate will then go to the wet side of the BLEND knob to mix with the dry signal. In the REVERB + DIRECT position, the signal after the BLEND knob goes into the gate so that both the wet and dry signals are gated. The output of the gate is then sent to the MAIN OUTPUT of the Holier Grail. In this last position, it is possible to gate only the dry signal by turning the BLEND knob to its counter-clockwise (minimum) position. GATE THRESHOLD Knob This knob determines when the gate should actually be opened or closed. When the GATE THRESHOLD knob is in the counter-clockwise (minimum) position, the threshold is set to high; it will take a very loud signal to open the gate. When the GATE THRESHOLD knob is in the clockwise (maximum) position, the threshold is set to low; the gate will only need a small signal to open up. GATE REVERSE Switch This slide switch enables you to reverse the normal operation of the gate. When the GATE REVERSE switch is off (left position), the gate will act normally; the gate is open when the signal is above the gate threshold and the gate is closed when the signal is below the threshold. When the GATE REVERSE switch is on (right position), the gate will act opposite to how it normally works; the gate is closed when the signal is above the gate threshold and the gate is open
Brand:
Electro-Harmonix
Category:
Guitars
>
Guitar Amplifiers and Effects
>
Guitar Effects
>
Guitar Effects Pedals
>
Delay and Reverb
UPC:
683274010267
Model Number:
HOLIER GRAIL
MSRP:
$258.00
|
|
|
|
Electro-Harmonix #1 Echo Delay Pedal | 
Electro-Harmonix Deluxe Memory Man Pedal | 
Electro-Harmonix Holiest Grail Reverb Pedal | 
Electro-Harmonix Holy Grail Plus Pedal |
|
| |
|
Bookmark Us!
