| |  | |
Click to Enlarge
| Lowest price:$4,800.00Description:
The D.W. Fearn VT-7 Stereo Compressor has an all Class-A vacuum tube audio path, like all Fearn audio products. The gain reduction elements utilize circuitry that duplicates the sound and characteristics of the finest classic vacuum tube compressors, without depending on tubes that are no longer manufactured. The control circuitry is modern solid-state analog. The two channels may be used independently or linked together for stereo. A built in sidechain high-pass filter may be selected to reduce the compression on bass-heavy material.Controls (each channel): •Threshold •Gain •Attack •Release •Harder/Softer •Separate/Link/Link HPF •The VU meters may be switched between indicating gain reduction or output level.The VT-7 Compressor has a highly transparent sound, although it can be used more aggressively when needed. Artifacts of the compression process are substantially lower than in most other compressors.The two channels may be used independently, or linked for stereo. In addition, a third position on the Link switch inserts a high-pass filter (HPF) in the sidechain to reduce the gain-reduction sensitivity of the VT-7 to low frequencies. This is a gentle roll-off, nominally at 100Hz. This allows a bass-heavy mix to have a better frequency balance, and prevents heavy low-frequency audio from modulating the audio level. The VT-7 is equally adept in tracking as well as a bus compressor. Even jazz and classical tracks can be sent through the VT-7 for some mild gain control without obvious effect other than a significant improvement in the overall sound of the mix.Design Philosophy Like all D.W. Fearn products, the VT-7 stereo compressor is a no-compromise design. From the quarter-inch thick front panel painted with the finest polyurethane finishes to the choice of all components and controls, the VT-7 is built to look as great as it sounds. Fearn build products that last, so they use parts with superior durability and longevity. Fearn products are hand-built by craftsman, one at a time, in the USA.Important Note: Having many tubes, the VT-7 generates a considerable amount of heat. We highly recommend using D.W. Fearn Vented Rack Panels (#180296) above and below the unit for proper cooling.History of the VT-7 Compression Amplifier Compression (or limiting) is sometimes seen as a necessary evil in the recording process. Often it is used to compensate for less than optimum performance or recording technique. However, when used appropriately, there is no question that good-sounding compression can add loudness, power, and improved impact to a recording. Over many years of recording, I have had the opportunity to use and sometimes own some of the best compressors in the world. For the D.W. Fearn line of products, a compressor was obviously important. I began the search for the ultimate compressor design in 1995 and it wasn t until 2004 that I developed the sound I was looking for. There are several ways to achieve compr
Brand:
D.W. Fearn
Category:
Pro Audio
>
Signal Processors
>
Compressors and Limiters
UPC:
889406167940
Model Number:
VT-7
MSRP:
$4,800.00
|
|
|
| |
|
Bookmark Us!
